Ratoc FR1SX Betriebsanweisung PDF herunterladen (Seite 32)

Windows

[Delay time until 1394 transaction start]

Default value is 4.You can set delay time for some SCSI devices which will

not receive any command if a next command is issued right after Start/Stop

Unit command is issued.

[Enable SCSI bus reset]

Default value is enabled.You can set whether the FR1SX issues SCSI bus

reset to a SCSI device or not.

[Enable START UNIT command]

Default value is disabled. You have to enable START UNIT command for

some SCSI devices which will not work if they does not receive this START

UNIT command.

[Enable parity check]

Default value is enabled. You can set parity check enable or disable.

[Target SCSI ID.]

Default value is AUTO. You can set target SCSI ID No.

[Max Payload Size]

Default value is 1024. You can set Max byte size in

transferring IEEE1394 Read/Write DataBlock. Max size is 2048 Bytes. But,

if a data error happens during data transfer, you should set this value to 1024

Bytes to avoid the error.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 63 64

Keine Kommentare

Ratoc FR1SX Betriebsanweisung Seite 32